Your needs, this model
Does it fit your priorities?
Is the listed cup capacity a fit?
PUR lists this exact pitcher at 7 cups. The number describes the whole pitcher and not the amount of filtered water immediately ready after one reservoir fill.
Explore this need in the finder →Is the included filter route essential?
This current package is PUR PLUS with the PPF951K family and a lead-reduction claim in PUR’s current performance sheet.
Explore this need in the finder →Do you require a documented lead-reduction claim for the exact filter?
PUR’s current PPF951K performance sheet lists the claim under specified test conditions; check the full sheet and your local water report.
Explore this need in the finder →The seven-cup PUR body paired with the PLUS lead-reducing filter
PUR PLUS 7 Cup Pitcher is the current PPT711 product family, offered in white and smoke finishes on PUR’s US page. It is listed at seven cups and about 9.6 inches wide, 10.1 inches high and 4.5 inches long, close to the dimensional envelope of the basic PPT700. The important distinction is in the supplied filter: PUR lists a PLUS lead-reducing cartridge and a change reminder, rather than the standard PUR filter in the basic seven-cup model. The cartridge package should say PLUS; finish color alone is not a reliable way to identify the replacement route.
This configuration suits someone who has a reason to choose the PLUS filter’s documented claim and wants a smaller listed capacity than PUR’s eleven-cup PLUS pitcher. It is not a general answer for every water concern. More treatment claims do not mean the pitcher removes anything a particular household has not identified, and a filter does not replace local testing. The smaller body does not change the cartridge’s gallon capacity or two-month schedule, so frequent use can still bring replacement around quickly.
Keep the filter evidence attached to the model
PUR’s current performance sheet identifies the PLUS pitcher cartridge family as PPF951K and includes a lead-reduction claim for that filter under the listed challenge conditions. The sheet also names reductions for other contaminants and distinguishes those results by specified test conditions. It reports a 40-gallon capacity and an approximate two-month replacement interval. Those are the useful purchase facts to compare with the standard PPF900Z option; the regular filter does not carry the same lead claim.
There is a source-version detail worth checking when replacing a filter: PUR’s current PPT711 page links a “PUR PLUS Pitchers” quick-start guide, but that document itself lists PPT710, PPT110 and CR1110 and names the older CRF-950Z cartridge. The current product details identify PPT711 and its performance sheet names PPF951K. The page-to-guide link is direct manufacturer evidence, but the guide’s model and cartridge codes do not match the product’s current SKU and filter sheet. Do not treat those numbers as interchangeable just because they share “PLUS” language. Check the current package instructions and match the pitcher and cartridge labels before ordering or following a step that conflicts with the included materials.
PUR’s product and filter documentation cautions that these pitchers do not filter microbes and should not be used to make unsafe or unknown-quality water safe without disinfection. The filter sheet gives a cold-water operating range, roughly 34–82°F. If a local report or test raises a different contaminant concern, verify that it appears in this exact cartridge’s current data sheet and follow any relevant public-health advice.
What ownership asks of you
Use cold tap water, prepare the cartridge according to the exact included guide, and seat the filter until it locks. The standard basic filter instructions call for a short rinse; the older PLUS guide gives a different soaking and rinse procedure, which is why following the right guide matters. Avoid using generic setup steps across versions. PUR’s pitcher components can be washed as the manual directs, but remove the cartridge and remove or protect any electronic reminder part before dishwashing if the guide says to. The filter light is a time/use reminder, not a contaminant sensor.
Use both the gallon and calendar limits: at most 40 gallons or roughly two months, whichever arrives first, with earlier replacement if the water or flow calls for it. The reminder does not calculate household consumption or assess the source water. A mark on the calendar is a practical backup for a pitcher shared among people.
Finder fit and alternatives
Selecting seven cups, the PUR PLUS route and a documented lead claim should return this family. A standard-PUR-only choice, reusable-shell requirement, filter-capacity minimum above 40 gallons, or maximum-height limit below 10.1 inches should exclude it. The same choice may include the 11-cup PLUS model if the user does not set a capacity or height limit; selecting seven cups deliberately makes the smaller reservoir a requirement.
Choose PPT711 over the basic PPT700 only when the PLUS lead-reduction filter is the reason for the purchase. The shapes and nominal capacities are close, but the replacement cartridge and its claims differ. Choose the PUR PLUS 11 Cup if larger volume is useful and the shelf dimensions work; choose a standard PUR model if lead reduction is not needed and its filter evidence is a better fit. A Brita Elite model also documents lead reduction, but it uses a separate cartridge system with a stated 120-gallon capacity and different setup. Those systems cannot be treated as interchangeable answers without checking their own data sheets.
Key details at a glance
| Listed pitcher capacity | 7 cups |
|---|---|
| Included filter | PUR PLUS |
| Stated filter capacity | 40 gal |
| Typical replacement interval | 2 months |
| Lead result in exact-filter test data | Yes |
| Height | 10.1 in |
| Width | 9.6 in |
| Length | 4.5 in |
| Reusable filter shell | No |
| What the filter is documented to reduce | PUR’s PPF951K PLUS sheet lists a lead-reduction claim and additional specified reductions under its stated test conditions. The standard and PLUS filters are different; PUR says the pitcher does not filter microbes. |
| Use and care | Use only cold tap water, approximately 34–82°F (1–28°C). The supplied filter is rated for up to 40 gallons or about two months; replace at the first limit reached and earlier if conditions warrant. Not for microbiologically unsafe or unknown-quality water without disinfection. |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Check the exact filter setup before you shop.
Capacity, filter type and the written reduction claims belong to the pitcher-and-cartridge combination, not just the pitcher shape.
