Comparison
PUR standard or PLUS pitcher filter?
In PUR's pitcher line, “standard” and “PLUS” identify different cartridge routes, not a scale from one body size to another. The current product pages include both standard and PLUS pitchers, and the same nominal capacity may appear in a pair with different included filters. Start with the filter model and current performance sheet, then decide whether the body size and dimensions suit your routine.
Standard PPF900Z: documented reductions without the PLUS lead claim
PUR's standard pitcher filter is identified as PPF900Z in the current filter performance material. Its listed claims concern specified contaminants and taste/odor under stated test conditions. That data sheet does not list the PLUS lead-reduction claim. Current standard-filter pitchers include the slim PPT600/PPT650 family, the 7-cup PPT700, the 10-cup PPT001, the 11-cup CR-1100C and Beautiful by PUR 12-cup PPT120W. They do not all have the same shape or reminder hardware.
PUR specifies a 40-gallon limit and an approximate two-month interval for its current pitcher filters. More water volume in the body does not extend the filter life. The two-month estimate is a planning reminder; actual usage and water conditions can bring replacement sooner. PUR also says its filters do not filter microbes, so neither standard nor PLUS is a treatment for unsafe or unknown-quality source water without disinfection.
PLUS PPF951K: a different documented claim set
PUR's current PPF951K performance sheet identifies the PLUS lead-reducing pitcher filter and lists additional reductions under specified conditions. The current PLUS seven- and eleven-cup pages identify PPT711 and PPT111. Choose a PLUS package only when its filter claim matches a known water concern; it does not follow that a more expensive filter is needed in every home. Read the full sheet and follow utility, testing or public-health advice where relevant.
A manual bridge remains important: PUR's support library has a quick-start guide for older PPT710/PPT110 and CR1110 numbers. The current pages use PPT711/PPT111. The older guide is not treated here as the verified setup or light-reset guide for those current model numbers. Check the instructions in the exact box and confirm replacement compatibility using the model printed on your pitcher.
Pick body volume separately from the filter question
The seven-cup PLUS body and seven-cup standard PPT700 have similar listed dimensions, but their filter claims differ. The eleven-cup PLUS and eleven-cup standard models also differ in width and depth, so measure rather than using capacity as a proxy for fit. The eight-cup slim PPT600 and sleeve-equipped PPT650 are narrower; their standard filter does not become a lead-reduction filter because the sleeve changes the look. Beautiful by PUR has the largest listed capacity here, but it is a standard PPF900Z package.
- PUR 7-Cup standard: a smaller PPF900Z pitcher without the PLUS lead claim.
- PUR PLUS 7-Cup: the current PPT711 route with PPF951K and its lead claim.
- PUR 11-Cup standard and PUR PLUS 11-Cup: two larger choices with different cartridge claims and body dimensions.
Filter preparation also differs. The current basic guide covers PPT700/PPT001/CR1100, while the PPT600/PPT650 manual gives its own short rinse-and-twist-lock procedure, and Beautiful's PPT120W guide names the standard PPF900Z filter. Follow the exact current guide shipped with a model; do not use the older PLUS directions as a substitute for an unconfirmed current model manual. In every case, track both the filter limit and the calendar reminder, remove the filter before cleaning, and verify dishwasher rules for the exact pitcher components.
When you are ready, compare the exact setup in the pitcher finder and confirm the model and cartridge number together before ordering.