LARQ Pitcher 2 review

The larger LARQ pitcher is still a gravity pitcher

LARQ Pitcher 2 is the brand’s 10-cup, 2.5-liter redesign. The product card identifies the Amalfi Blue configuration as SKU PNAAB250A; the maker also lists Mojave Dune and Eucalyptus Green colorways. Its body is BPA-free premium-grade plastic. The key practical difference from the original LARQ Pitcher and Pitcher PureVis is capacity: Pitcher 2 holds more, but it does not add a pump or a self-cleaning UV wand. It remains a pour-through pitcher whose reservoir needs time to filter.

That makes the 10-cup label a storage-size clue rather than an instant serving promise. If your household needs a large volume ready immediately, plan to fill ahead. LARQ estimates 3–4 minutes for a full filter pass but says time varies with source-water quality and filter age. The 10-cup size is a good reason to consider Pitcher 2 over the 8-cup standard/PureVis body; it is not evidence of faster filtration or a faster stream at the spout.

One exact filter route, with published but limited test data

Pitcher 2 uses the LARQ Advanced Pitcher Filter, not an interchangeable generic cartridge. The LARQ FAQ says Pitcher 2 uses the Advanced filter that fits its other pitchers; the exact product page shows an Advanced filter included. LARQ’s 2025 filter report names the Advanced filter model PAFR190A and publishes laboratory results including lead, PFOA/PFOS, metals and other contaminants. Its lead table reports 99.3% at pH 6.5 and 99.7% at pH 8.5 for initial filter life. The test report describes specific laboratory work; it does not establish NSF certification or guarantee the same outcome with every household’s water.

The stated filter capacity is up to 60 gallons (227 liters). LARQ says to replace every two months or sooner when the volume limit is reached. The setup is conventional: wash the pitcher, soak the filter for 10 minutes, snap it in, fill and discard the first batch. Some harmless black carbon dust may be visible at first. It is worth planning replacement supply ahead if you use the pitcher daily: a longer nominal gallon figure does not mean it will last beyond the manufacturer’s time limit.

Match the water source to the instructions

The Pitcher 2 FAQ is unusually clear about input water: it is designed for treated municipal tap water and is not rated for untreated private-well water. If you use well water, LARQ says to have it tested and treated before filtering. Do not use hot or sparkling water; the stated maximum is 40°C / 104°F. The Advanced cartridge is not rated for fluoride, does not change water pH, and is not a softener for extremely hard water. A test result for a named contaminant is not permission to ignore local advisories or to treat an unsafe source.

This is also where LARQ’s standards language needs precision. The manufacturer says its filters are independently tested to NSF/ANSI 42, 53 and 401 methods. Its report lists filter-level results under specified conditions. That is not the same as saying that Pitcher 2 holds a third-party certification. If your purchase depends on a formal certification for a specific contaminant, check the current certification directory and the exact claim scope instead of relying on the shorthand “NSF tested.”

Who should choose Pitcher 2 over the other LARQ models?

Pick Pitcher 2 if the 10-cup vessel is your deciding feature and you want the Advanced-filter route without electronics. Pick the original LARQ Pitcher if the 8-cup capacity is enough and you can verify the original model/SKU on the listing. Pick PureVis if you specifically value its UV-C wand and filter tracking and are comfortable charging it, cleaning the wand by hand, and paying attention to its narrow limits. PureVis is also 8 cups, so it is a different feature choice, not a capacity upgrade.

Across the family, the filter’s replacement timetable, water-source limits and contaminant table matter more than the color. The P2’s three colors are listed as design variants, not three separate treatment systems. The standard filter does not address every water-quality need; if fluoride, softening, or unsafe source water is essential, look outside this family for an exact, independently supported treatment plan.

LARQ Pitcher 2 product page · Pitcher 2 setup, water and filter FAQ · LARQ filter performance data · Compare LARQ Pitcher, Pitcher 2 and PureVis